IR Learning and Playback

By adding a TOPIR8 you also have the ability to control your music sources via infra-red.

The AXA-TOPIR8 is a stand alone version of the Infrared learn and playback card available in the commercial matrix frame. It has an RS232 port for programming from the PC application. Once the device is programmed it can be located anywhere in an installation and the RS485 port is used to control the playback of the stored Infrared codes. Up to 8 independent Infrared outputs are available when stereo infra-red emitters are used.

right click to download pdf

CD ROM Messaging System.

The ADX2 (2 x CD ROM's) when combined with the matrix provides control and playback of announcements and advertising. Any track can be scheduled to play into any zone or combination of zones at specific times of the day, or days of the week. Tracks can also be manually triggered from any location where there is a control panel. For example, a button at reception could be labelled 'shuttle bus' and if pressed an announcement could playback "Ladies and Gentlemen, our courtesy bus will be leaving in 10 minutes from...." Or inputs could be taken from 3rd party equipment such as motion detectors, intruder alarms or fire/evacuation systems.

Dynalite Control Panels

The Dynalite™ range of control panels can be used to control any of the AXA Design products.

These include control panels (standard and custom made), timeclocks, motion detectors, auxiliary input and output devices and much more.

Contact your local Dynalite distributor for more information on their product range.

AXA-USB/485

Optically isolated USB to RS485 Converter.

The AXA-USB/485 is intended for use as a programming tool, for use with computers that don’t have a standard serial communication port.

Works with standard Windows XP drivers, but you will have to adjust the latency time under the advanced settings for the comm. port. By default it sets the Latency Timer to 16ms, which will need to be reduced (typically 1ms).

right click to download pdf

The AXA-VC42 enables devices on a Dynalite network to control the selection between 4 separate composite video inputs to two independent composite video outputs.

right click to download pdf

AXA-TOM
(Tiny Output Module)

The AXA-TOM is intended for use where low voltage, low current contacts are required to trigger third party devices like Gate Latches, Garage Door Controllers, Curtain Controllers, Damper Motors etc. Two relay outputs are available, Relay 1 has a common, normally open and normally closed connection and Relay 2 has a common and normally open connection.

right click to download pdf

AXA-TIOM
(Tiny Input Output Module)

2 x 5-12V DC Inputs & 1 Volt Free Relay Output Module

The AXA-TIOM is intended for use where low voltage, low current contacts are required to trigger third party devices like Air Conditioning and Garage Door Controllers. One normally open relay output is available and two 5 - 12 Volt DC inputs are available (not optically isolated). The relay can be set to latching and the inputs manually interrogated or the relay can be set to pulse and the internal logic will monitor input one and pulse the relay only if necessary.

right click to download pdf

AXA-HME1

2 Source x 1 Zone stereo pre-amp

The AXA-HME1 enables devices on a Dynalite network to control source selections between two audio components and control Volume, Bass and Treble to one zone of amplification. Due to its compact size the AXA-HME1 uses stereo 3.5mm sockets for audio inputs and outputs.

AXA-DYN/DMX

The AXA-DYN/DMX enables devices on a Dynalite network to control up to 24 channels of DMX on a single DMX network. Multiple DMX networks of up to 24 channels each can be used with an AXA-DYN/DMX on each network.